RadiaCode-101 (радиакод-101, RadiaCode-102, RadiaCode-103)

Begonnen von DG0MG, 13. Februar 2021, 17:19

⏪ vorheriges - nächstes ⏩

70 2912

Hallo zusammen,

ich nutze einen RadiaCode 103.
In unregelmäßigen Abständen trennt sich die bluetooth-Verbindung zwischen RC und Mobiltelefon selbständig. Meist verbinden sich die beiden Geräte wieder automatisch, was an den charakteristischen Tönen erkennbar ist, doch bislang konnte ich keine Anhaltspunkte zu der Ursache des Verhaltens festmachen, der Verbindungsverlust erfolgt  m.E.n. willkürlich. Wobei, doch: es passiert immer im Standby-Betrieb, also bei aktiver Nutzung funktioniert alles tadellos. Das BT-Zeichen im Display des RC wird dann auch nicht mehr angezeigt, die vom RC autark dann aufgezeichneten Werte werden in die App nach wieder erfolgter Verbindung auch nachgeführt.

Konnte/Kann das jemand von euch auch beobachten?

SW RC 103: v04.14 / Boot-version v04.01
App: v 1.66.03

Es stört mich jetzt nicht, aber eine Erklärung für das Verhalten würde mich schon interessieren..  :)

VG
Thomas

Edit: Rechtschreibfehler behoben

Radiacode-101

Zitat von: 70 2912 am Gestern um 23:00Hello everyone,

I'm using a RadiaCode 103.
At irregular intervals, the Bluetooth connection between the RC and my mobile phone drops out of its own accord. Usually, the two devices reconnect automatically – which is indicated by the characteristic beeps – but so far I haven't been able to pinpoint the cause of this behaviour; in my opinion, the connection loss occurs at random. Although, actually: it always happens in standby mode; when the device is in active use, everything works perfectly. The Bluetooth icon no longer appears on the RC's display, but the data recorded independently by the RC is synchronised with the app once the connection is re-established.

Has anyone else experienced this?

RC software v04.14 / Boot version v04.01
App: v 1.66.03

It doesn't bother me at the moment, but I'd be interested in an explanation for this behaviour...  :)

Best regards,
Thomas

Edit: Spelling mistake corrected


This can be resolved via Android settings, especially if you have a Samsung.

Disable energy efficiency and battery optimisation for our app in the settings.

https://www.radiacode.com/troubleshooting/loss-of-connection-with-the-mobile-device